PARTRIDGE
ELECTRONICS
54-56 Fleet Road, Benfleet, Essex. SS7 5JN
SECTION
7
ELECTRONIC SUB UNITS
(GENERAL ELECTRONIC DEVICES)
INDEX PAGE                 ENQUIRY FORM                 ORDER FORM                 GENERAL INFO

INDEX
ASSORTED ASSEMBLED MODULES
INDEX
ASSORTED ASSEMBLED MODULES
HK00027
HK00661
HK00490
HK00855
HK00857
HK00372
HK00488
HK00379
HK00386
HK00387
HK00383
HK00035
HK00037
HK00449
HK00319
HK00038
HK00630
HK00530
 
 
LED Counter
Access Control
Electronic Traffic Lights
D.M.X. Relay board
D.M.X. Receiver
Remote control
Digital loco decoder
Control module
Control module
Control module
Voltage detector
Noise activated sensor
Zone control
Timer
Relay board
Control interface
Counter
Liquid level control
 
 
HK00631
HK00651
HK00854
HK00856
HK00396
HK00485
HK00268
HK00652
HK00382
HK00021
HK00601
HK00267
HK00260
HK00321
HK00027
HK00662
 
 
Counter
Sequencial comand module
D.M.X. Transceiver
D.M.X. Checker
Remote control
Digital loco controller
Light sensor
Comand module
Voltage detector
Liquid level detector
IR detector
Timer
Delay release
Relay board
Counter
Access control
 
 
Code:- CHK00027
Price £21-00
The module counts a unit every time an
electric pulse is received at the input.
Counter also has a re-set connection
which is also activated by a pulse.
The LED display is 13.5mm high, counts up to 99.
Technical
Data
Power volts DC
12V
Current
50mA
Size mm
120x65x42
Standard LED Counter
Code:- CHK00631
Price £46-50
A cyclic digital counter provides up / down
counting from 0 to 9,999 with the capacity
to memorise the last number of the count.
Contact closure inputs provide "up" "down"
"pre-set" and "re-set"
Designed for impulse inputs from push buttons
or external signals from clocks.
Display 4 x 13.5mm LEDS
Technical
Data
Power volts DC
12V
Current
110mA
Max count freq.
25Hz
Size mm
85x55x66
Digital Up/Down Counter
Code:- CHK00661
Price £58-50
Access control module with key board designed
as door access device. 10 different access code
combinations, composed of 4 digits can be stored,
even when power supply to module is stopped.
Will authorise or deny access based on input code.
Key board will allow 5 entries before auto blocking.
It has a timed relay adjustable 0.1-60 minutes
Module includes LED`s and accoustic signals.
Technical
Data
Power volts DC
12V
Current
60mA
Max relay current
5A
Max block time
5 mins.
Size mm
90x28x70
Access control Module
Code:- CHK00651
Price £101-00
16 Relay outputs, with each pulse received, relays
will connect one by one,after each relay connects
previous one is disconected, relays connected in
sequence forward or backward, when last one is
connected sequence starts again.
Internal or external trigering
Adjustable delay operating time 0.3 sec. to 10 mins.
Requires external power supply.
Technical
Data
Power DC
12 V
Current
100 m/a
Max. relay load
50V DC @ 5A
Dimentsons
210x22x110mm
K172-2378
Sequencial Comand Module
Code:- CHK00490
Price £21-00
An electronic traffic light module ideally suited
to model railway applications. Red, orange and
green lights will operate sequentially and the
time lights remain on red and green can be
adjusted between 5 and 50 seconds. Timings
can be adjusted via on board pre-set.
Technical
Data
Power DC
12-15V
Current
20-40mA
Dimensions:- mm
90x25x69
Electronic Traffic Lights
Code:- CHK00854
Price £105-00
DMX-512 module
May be used as mini 4 channel lighting desk or as a
DMX protocol converter in a customs special effects.
Supplied with comprehensive data sheet.
Sample VBASIC application software available
(see www.milinst.com)
Technical
Data Trans. config.
Input options
RS232
Address 1-114
(9600baud)
Technical
Data Recv.config.
4xDAC 0-5v
  
4 R/C
4 bite string
servo outs
K202-2384
D.M.X. Transceiver
Code:- CHK00855
Price £91-50
Create and control your own special effects
over the DMX network with this 8 channel
digital receiver board.
Once base address is set , the relay outputs
may be controlled from standard DMX desk.
XLR input and output sockets.
Technical
Data
Base address
1-505
Max. relay load
30V DC @ 2A
Size:-mm
135x30x90
K177-2384
D.M.X. Relay Board
Code:- CHK00856
Price £68-00
Check what is happening on your DMX network
Displays the number of transmitted channels
and data value on selected channel
push button selection
Technical
Data
Display size
2 x 16 LCD
DMX con.
3pin con.
Size:-mm
120 x 30 x 45
K178-2384
D.M.X. Checker
Code:- CHK00857
Price £80-50
The receiver has eight output pins,
they may be configured to be either
digital outputs or suitable for driving
RC type servos or configered to drive
Triac lamp dimmers.
The base address may be set from 8-248
using on board jumpers
Technical
Data
Power DC
12V @ 50mA
Configuration
PCB jumpers
Size:-mm
90 x 40 x 90
K179-2384
D.M.X. Receiver
Code:- CHK00396
Price £32-50
This module can detect objects with an
infrared device. Once an object has been
detected, module will open or close it`s
contacts, activating an auxilary device.
Ideal counting objects or security systems.
Technical
Data
Power DC
12V
Current
50mA
Max. relay load
230V @ 5A
Size:-mm
69x56x30
Infrared Photocell Detector
Code:- CHK00372
Price £18-50
This is a photo-electric sensor with relay output.
The module has a probe incorporated within it,
when the probe receives light the module will be
activated. It can be adjusted depending on the
light intensity. (Supplied complete with probe)
Technical
Data
Power DC
12V
Current
5-60mA
Min/max. detect .
25-130 Lux.
Max. relay load
230V @ 5A
Size:-mm
65x45x30
Light Detector
Code:- CHK00485
Price £97-00
Designed to simultaneously control
trafic of 12 DC model locomotives.
Allows you to change speed, direction,
main booster on the train you are controlling.
Controller with a decoder provides these facilities.
Also fitted with short circuit protection.
Technical
Data
Power
14-15v A.C.
Current Min.
110 ma
Peak current
4A
Size console 156x50x107mm
Size booster
165x55x145mm
K198-2390
Digital Locomotive Controller
Code:- CHK00488
Price £21-00
This device converts data
sent from the controller to the "loco"
for full independent" loco" control
this device should be fitted in each loco.
Accepts up to 64 program combinations.
Technical
Data
Power
14-15v DC
Current max.
1.2A
Size mm
40 x 16 x 21
K199-2390
Digital Locomotive Decoder
Code:- CHK00268
Price £22-00
Light sensitive module which activates a relay
when the light level drops below an adjustable
level. Is fitted with an LED operating indicator.
Technical
Data
Power DC
12V
Current
50mA
Min/max. detect
25-130 Lux.
Max. relay load
230V @ 5A
Size:-mm
65x45x30
Low Voltage Light Sensor
Code:- CHK00379
Price £36-00
This module has four relay outputs, each
impulse the module receives will cause the
next relay to close and previous relay to open,
it can also be activated by internal oscilator
which can be adjusted 0.3 to 10 seconds.
Technical
Data
Power volts DC
12V
Current
50mA
Size mm
110 x78
4 Output Sequential Module
Code:- CHK00652
Price £51-00
This unit is as above but
with eight sequence plus
*Output reset facility*
*Inverse polarity protection*
*LED output indicator*
Technical
Data
Power volts DC
12V
Current
60mA
Size mm
155 x 100
8 Output Sequential Comand Module
Code:- CHK00386
Price £22-00
150Hz to 2KHz
Code:- CHK00387
Price £21-00
2KHz to 15KHz
.
These units activate a relay
operated by input frequency
Modules are polarity protected
and are supplied.with LED
to indicate the operating mode
Technical
Data
Power volts DC
12V
Current
50mA
Relay(max.load)
240V @ 2A
Size mm
70 x 45
Relays Frequency Activated
Code:- CHK00382
Price £15-50
7V to 18V activated
Code:- CHK00383
Price £15-50
18V to 28V activated
This module detects any voltage decrease,
easy to use and fitted with a buzzer.
The first module can be used to monitor
voltages within the range 7 to 18 Volt
The second module can be used to monitor
voltages within the range 18 to 28Volt
Technical
Data
Power volts DC
18V
Current
16mA
Size mm
70 x 40
Voltage Decrease Detector Modules
Code:- CHK00021
Price £20-00
When the sensor on this device comes
in contact with the liquid an external
device can be switched on via an on
board relay. Alternatively the system
can be set to switch off when sensor
comes in contact with the liquid.
Technical
Data
Power volts DC
12V
Current
50mA
Relay(max.load)
5A @ 240V
Size mm
64 x 45
Liquid Level Detector Module
Code:- CHK00035
Price £26-50
This module activates a relay switch
when noise is detected.
Has adjustable sensitivity control
(for use in noisy enviroments).
Technical
Data
Power volts DC
12V
Relay(max.load)
5A @ 240V
Current
50mA
Input signal
50mV ( min)
Size mm
75 x 40
Noise Activated Sensor Module
Code:- CHK00601
Price £11-50
An ultra compact unit housed in a fully sealed
plastic enclosure. Ideal for testing remote control
units PIR systems, CCTV camera infrared emitter,
security beam positioning Etc.
. A green LED lights
when detector senses infrered source
Technical
Data
Battery
9V
(Not supplied)
PP3
Size mm
32 x 25
Infrared Light Detector Module
Code:- SR00037
Price £40-00
A four zone splitter which can be used
with an intruder alarm control panel,
to provide four tamper zones.
Module contains four LED indicators to
give indication of which normally closed
input has been triggered. Contains N.O.
and N.C. switch outputs for each zone.
Technical
Data
volts DC